Calculatorby CodingMarble
All calculators

CGPA to Percentage Calculator

Enter your CGPA and choose your board or university. You get your percentage using that institution's conversion formula, plus a percentage-to-CGPA check.

Percentage = (CGPA − this) × multiplier

Your result appears here.

What is a CGPA to percentage calculator?

A CGPA to percentage calculator converts your Cumulative Grade Point Average into an equivalent percentage of marks. Job portals, government forms, scholarships and admission applications often ask for a percentage even though your marksheet shows a CGPA on a 10-point scale. The catch is that there is no single national formula: CBSE, AICTE-affiliated technical universities, Anna University and Mumbai University each use a different rule. This online CGPA to percentage converter lets you pick your board or university and applies the right CGPA to percentage conversion formula, with a full conversion chart below the result.

How to use the CGPA to percentage calculator

  1. Enter your CGPA (for example 8.2). Use your final cumulative CGPA for a degree, or a semester's SGPA for a semester-wise figure.
  2. Choose your board or university formula from the list.
  3. Read your percentage, the formula used, the usual class/division, and a chart of CGPA values from 5 to 10.
  4. If your university is not listed, choose Custom multiplier and enter the numbers from your marksheet or ordinance.

CGPA to percentage conversion formulas in India

Board / universityFormula8.0 CGPA =
CBSE Class 10 (2010–2017 CCE scheme)CGPA × 9.576%
VTU (2015 scheme onwards), AKTU (2019–20 onwards), JNTUK (R16 onwards), SPPU and other AICTE-model universities(CGPA − 0.75) × 1072.5%
JNTUH, GTU, JNTUK (R13 and older)(CGPA − 0.5) × 1075%
Anna University, RGPV, VITCGPA × 1080%
Mumbai University, general (before 2026)7.1 × CGPA + 1167.8%
Mumbai University, engineering (before 2026)7.4 × CGPA + 12 (CGPA ≥ 7)71.2%
Delhi UniversityCGPA × 9.576%

Formulas change with regulations and schemes, so the rule printed on the back of your grade card or in your university's ordinance always wins. Many universities also issue a CGPA to percentage conversion certificate on request; that certificate is what employers and foreign universities accept as official.

CBSE CGPA to percentage: the 9.5 rule

From 2010 to 2017, CBSE Class 10 results showed a CGPA instead of marks. CBSE said the percentage can be found by multiplying the CGPA by 9.5. The 9.5 comes from averaging the percentage of all students who scored between 91 and 100 in the main subjects over the years – it is a statistical estimate, not an exact reversal of your marks. So a CGPA to percentage calculator for CBSE class 10 gives: 10 CGPA = 95%, 9 CGPA = 85.5%, 8 CGPA = 76%, 7 CGPA = 66.5%. CBSE has since returned to marks, so this rule matters mainly for older marksheets.

CGPA to percentage for engineering (VTU, AKTU, AICTE)

Most technical universities now follow the AICTE model formula Percentage = (CGPA − 0.75) × 10. VTU applies it to the 2015 scheme onwards (including the 2018, 2021 and 2022 schemes), and AKTU adopted it for B.Tech, MBA and MCA from the 2019–20 session. With this rule a perfect 10 equals 92.5% and a CGPA of 5.0 equals 42.5%. It is the default choice if you are looking for a CGPA to percentage calculator for engineering or B.Tech and your university follows AICTE regulations.

Worked example

A VTU student with a CGPA of 8.2: (8.2 − 0.75) × 10 = 7.45 × 10 = 74.5%. The same 8.2 on CBSE's rule would be 8.2 × 9.5 = 77.9%, and at Anna University 8.2 × 10 = 82%. This is why you must pick the right university before quoting a percentage.

Anna University, JNTU and GTU

Anna University's regulations (2017 and later) convert CGPA to percentage simply by multiplying by 10, so an 8.5 is 85%. RGPV and VIT use the same ×10 rule. JNTU Hyderabad and GTU use (CGPA − 0.5) × 10, so an 8.5 becomes 80%. JNTU Kakinada uses (CGPA − 0.75) × 10 for R16 and later regulations (R13 and older batches used − 0.5). If you study at an autonomous college under these universities, check whether your college publishes its own rule.

Mumbai University CGPA to percentage

For years, Mumbai University converted CGPI with 7.1 × CGPI + 11 for general courses (B.Com, B.Sc, BA) and 7.4 × CGPI + 12 for engineering grades of 7 and above (7.1 × CGPI + 12 below 7). A CGPI of 7.5 is therefore 64.25% on the general rule. Reports in 2026 say the university has moved away from formula-based conversion for new results and computes the percentage from actual marks instead. Use the formula for marksheets issued before 2026, and ask your college's exam cell for the current rule.

CGPA to percentage chart (common values)

CGPACBSE / DU (× 9.5)VTU / AKTU ((− 0.75) × 10)Anna (× 10)
1095%92.5%100%
9.590.25%87.5%95%
985.5%82.5%90%
8.580.75%77.5%85%
876%72.5%80%
7.571.25%67.5%75%
766.5%62.5%70%
657%52.5%60%

What is 9 CGPA in percentage? 85.5% on the CBSE rule, 82.5% on the AICTE rule and 90% at Anna University. What is the percentage of 7 CGPA? 66.5%, 62.5% or 70% respectively. 7.5 CGPA is 71.25%, 67.5% or 75%.

Percentage to CGPA calculator: going the other way

Reverse the formula. On CBSE's rule, CGPA = percentage ÷ 9.5 (76% → 8.0). On the AICTE rule, CGPA = percentage ÷ 10 + 0.75 (72.5% → 8.0). On Anna University's rule, CGPA = percentage ÷ 10. The chart under the calculator result helps you read either direction quickly.

Semester-wise CGPA to percentage

If you need a percentage for all semesters, first get your overall CGPA: multiply each semester's SGPA by its credits, add them up and divide by total credits – the GPA calculator does this weighting. Then convert the final CGPA here. Converting each semester separately and averaging the percentages gives nearly the same answer only when semesters carry equal credits.

CGPA to percentage calculator for your university

Here is how this CGPA to percentage calculator in India maps to common universities and boards. Pick the matching option in the list:

  • CGPA to percentage calculator VTU (including the VTU 2022 scheme and 2021 scheme): choose "VTU / AKTU / AICTE".
  • CGPA to percentage calculator AKTU and other AICTE-model universities: the same (CGPA − 0.75) × 10 option.
  • CGPA to percentage calculator SPPU (Pune University): SPPU's newer patterns use the AICTE-style formula; older patterns print a conversion table on the grade card, so check which applies to your batch.
  • CGPA to percentage calculator for Anna University (regulation 2017 and later), RGPV and VIT University: choose CGPA × 10.
  • CGPA to percentage calculator JNTUK: choose (CGPA − 0.75) × 10 for R16 and later (− 0.5 for R13 and older); for JNTUH and GTU choose (CGPA − 0.5) × 10.
  • CGPA to percentage calculator for Mumbai University: choose the general or engineering option for marksheets issued before 2026.
  • CGPA to percentage calculator DU (Delhi University): CGPA × 9.5 under the CBCS scheme.
  • CGPA to percentage calculator CBSE 10th results from 2010–2017: CGPA × 9.5.
  • Other universities (LPU, KL University, Amity, BHU, JNU, Calcutta University, Gujarat University, NIT Trichy, NIT Warangal and others) publish their own rules. Use the custom option with the multiplier and offset from your university's conversion letter or UGC-approved ordinance.

CGPA to percentage for B.Tech, degree and diploma

The CGPA to percentage calculator steps are the same for B.Tech, for other degree courses (B.Com, B.Sc, BA) and for diploma students: take the final CGPA across all semesters and apply your institution's formula. To calculate CGPA to percentage in engineering or diploma, never guess ×10 – the formulas above differ by up to 7.5 percentage points.

7-point and 4-point CGPA to percentage

Older Mumbai University and some other programmes used a 7-point scale; for a 7 point CGPA to percentage conversion, use the formula printed on that marksheet with the custom option. For a 4-point scale (common abroad), the calculator's ×25 option gives a simple linear estimate: 3.2 out of 4 is about 80%.

How to calculate CGPA to percentage by hand

To calculate CGPA to percentage manually: find your final CGPA, find your university's formula, substitute the number and round to two decimals. For example, 8.6 CGPA at a VTU college: (8.6 − 0.75) × 10 = 78.5%. That is the whole method – the calculator just saves you from picking the wrong formula.

What is a good CGPA and percentage?

  • 8.0+ CGPA (about 72–80%) is considered very good and clears most campus placement cut-offs.
  • 7.0–8.0 is first class at most universities; many companies ask for 60% or 6.5 CGPA with no active backlogs.
  • The highest CGPA is 10, which is 95% on CBSE's rule and 92.5% on the AICTE rule – not 100%.

Which is better, CGPA or percentage?

Neither is better; they measure the same performance differently. CGPA groups marks into grade bands, reducing the pressure of single-mark differences, while percentage keeps the exact marks. When a form asks for a percentage, give the converted figure and mention the formula or attach the conversion certificate. For converting individual marks to a percentage, use the percentage calculator.

How to do CGPA to percentage calculator steps

If you are wondering how to do a CGPA to percentage calculation, there are three steps: find the formula on your grade card or university ordinance, choose it in the calculator (or enter it as a custom multiplier), and type your CGPA. Most Indian CGPAs are out of 10, so the CGPA to percentage calculator out of 10 options above cover almost every case; use the 4-point option only for US-style transcripts.

CGPA to percentage calculator in Hindi (CGPA ko percentage kaise banaye)

CGPA to percentage calculator in Hindi: apne board ya university ka formula chuniye aur CGPA daliye. CBSE ke liye CGPA × 9.5 (जैसे 8.6 × 9.5 = 81.7%), aur Anna University ya Amity jaisi universities ke liye CGPA × 10 (8.6 → 86%).

CGPA to percentage calculator for BTech, semester wise

For a CGPA to percentage calculator BTech result, convert your final CGPA, not the average of semester percentages. A CGPA to percentage calculator semester wise approach converts each SGPA with the same formula, which is useful for internship forms that ask for one semester, but the degree percentage always comes from the final CGPA.

CGPA to percentage converter India: university formulas

This CGPA to percentage converter India list covers universities not in the dropdown. Always prefer the formula printed on your own transcript.

CGPA to percentage calculator GTU and KTU

For a CGPA to percentage calculator GTU conversion, GTU's 2013 circular sets Percentage = (CGPA − 0.5) × 10, so 8.0 becomes 75%. For a CGPA to percentage calculator KTU conversion, KTU moved to a plain CGPA × 10 rule for the 2015 and 2019 schemes in 2023, so 8.0 becomes 80%; pick the custom multiplier 10.

CGPA to percentage calculator for KL University

The CGPA to percentage calculator for KL University (KLU) uses (CGPA − 0.75) × 10, the AICTE model rule, so choose the VTU / AKTU option: 7.75 becomes 70%.

CGPA to percentage calculator for Amity University and Galgotias University

A CGPA to percentage calculator for Amity University multiplies by 10, and the CGPA to percentage calculator for Galgotias University typically does the same, so 8.5 becomes 85% at both; choose the × 10 option, and confirm against your grade card.

CGPA to percentage calculator for LPU, NMIMS and Jain University

We could not confirm one published CGPA to percentage calculator formula for LPU, NMIMS or Jain University that applies to every programme, so check the conversion note on your grade card or ask the examination office. If no rule is printed, many employers accept CGPA × 10 with a note saying so.

CGPA to percentage calculator for Techno India University and Calcutta University

For a CGPA to percentage calculator at Techno India University or Calcutta University (University of Calcutta), the conversion factor depends on the programme and regulation year, so use the multiplier stated on your marksheet in the custom option.

CGPA to percentage conversion: University of Hyderabad and NIT Trichy

For CGPA to percentage conversion at the University of Hyderabad or NIT Trichy, the institutes generally say the CGPA is the official measure; when a percentage is demanded, many students attach a conversion certificate stating CGPA × 10. Ask the academic section before you rely on a number.

CGPA to percentage calculator for UET Lahore

UET Lahore in Pakistan grades on a 4.0 scale, so a CGPA to percentage calculator for UET Lahore should not use the Indian ×9.5 or ×10 rules. Use the 4-point option only as an estimate, and follow the equivalence the university or HEC states on your transcript.

Frequently asked questions

How do I convert CGPA to percentage?

Use your board or university's formula. CBSE multiplies CGPA by 9.5, VTU and AKTU use (CGPA − 0.75) × 10, and Anna University multiplies by 10. Pick your university in the calculator to apply the right one.

What is 9 CGPA in percentage?

9 CGPA is 85.5% on the CBSE formula (× 9.5), 82.5% on the VTU/AKTU formula and 90% at Anna University.

What is the percentage of 7.5 CGPA?

7.5 CGPA equals 71.25% (CBSE), 67.5% (VTU/AKTU) or 75% (Anna University).

Why does CBSE multiply CGPA by 9.5?

CBSE found that students in the top grade band averaged about 95% marks, so it set 9.5 as the average factor between grade points and marks. It is an approximation, not an exact conversion.

What is the VTU CGPA to percentage formula?

For the 2015 scheme onwards, VTU uses Percentage = (CGPA − 0.75) × 10. A CGPA of 8.0 is 72.5%.

What is the AKTU CGPA to percentage formula?

AKTU uses (CGPA − 0.75) × 10 for students from the 2019–20 session onwards, as per its B.Tech ordinance.

What is a CGPA to percentage conversion certificate?

It is an official letter from your university stating your percentage equivalent. Employers, government recruiters and foreign universities often ask for it; apply through your college exam cell or the university portal.

How do I convert percentage to CGPA?

Reverse your formula. For CBSE divide the percentage by 9.5; for VTU/AKTU divide by 10 and add 0.75; for Anna University divide by 10.

What is the GTU CGPA to percentage formula?

GTU uses Percentage = (CGPA − 0.5) × 10, set by its 2013 circular. An 8.0 CGPA is 75%.

What is the KTU CGPA to percentage formula?

KTU uses CGPA × 10 for the 2015 and 2019 schemes, so 8.0 CGPA is 80%.

How do I convert CGPA out of 10 to percentage?

Use your university formula; if none is given, CGPA × 10 is the common default (CBSE uses × 9.5).

Last updated 2026-09-18

Related calculators

Designed & built with care by This calculator site, LovePDF and LoveImage are made in India by the CodingMarble team — websites, web apps and SEO-first tools.Visit CodingMarble